problems with control performance module??????

Thread Tools
 
Search this Thread
 
Old Aug 2, 2008 | 12:11 AM
  #1  
fastfity's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2006
Posts: 9
Likes: 0
problems with control performance module??????

06 screw 5.4 39,000 miles now its poping a code of p06070.
pops and hesatates when motor if cold but not when its up to opperating temp

thanks
 
Reply
Old Aug 2, 2008 | 11:09 PM
  #2  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Sorry dude , but there is no such code
 
Reply
Old Aug 3, 2008 | 02:58 AM
  #3  
fastfity's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2006
Posts: 9
Likes: 0
sorry its p0607
 
Reply
Old Aug 5, 2008 | 04:53 PM
  #4  
fastfity's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2006
Posts: 9
Likes: 0
any help would be appreciated
 
Reply
Old Aug 5, 2008 | 05:18 PM
  #5  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
PO607- Open circuit "ECM"


Power-train Control Unit (PCU), Power-train Control Module (PCM) Electronic Control Unit (ECU) and Electronic Control Module (ECM) are all the same thing.

Referred to as the PCM usually. A bad/pinched wire or the PCM itself . I think it's between 500 - 700 big ones to have it changed out at the dealership, unless your still under the warranty ..
 
Reply
Old Aug 5, 2008 | 05:59 PM
  #6  
fastfity's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2006
Posts: 9
Likes: 0
no warranty can i just get it reflashed
 
Reply




All times are GMT -4. The time now is 06:23 PM.