H13 HID connector problems
#1
11-03-2010, 09:15 AM
Join Date: Jun 2010
Location: Louisiana
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
H13 HID connector problems
So I spent 3 and a half hours trying to figure out how to wire my HID headlights that I bought from HIDGEEKS.COM. The connectors aren't right. My friend told me I should start looking for a Bi Xenon connector for it. Ive had no luck though. Any idea what kind of connectors/relay wires I'd need for a 2005 F-150 Lariat in terms of headlights and the H13 bulbs? Thanks in advance for any helpful responses. I'm kind of lost when it comes to lighting and electrical. I've gotten my fogs installed though so now my fogs are brighter than my headlights :/ Please help.
#2
11-03-2010, 12:04 PM
Senior Member
Join Date: May 2007
Location: Orlando
Posts: 2,101
Likes: 0
Received 0 Likes
on
0 Posts
What kit did you order from them? If you ordered an H13, it should have came with the right connector, regardless of being bi-xenon or not. Did it come with the same connection as the fog light kit (9005/9006/9145/H10)?
What kind of bulbs came with the kit? Do they move in and out on a spring within the base of the bulb?
What kind of bulbs came with the kit? Do they move in and out on a spring within the base of the bulb?
#3
11-03-2010, 12:27 PM
Senior Member
Edited.
I thought your username looked familiar.... You were the whiny kid from this thread:https://www.f150online.com/forums/ap...-please-2.html
Apparently Titan can see the future.
- NCSU
I thought your username looked familiar.... You were the whiny kid from this thread:https://www.f150online.com/forums/ap...-please-2.html
besides, looks like NSCU has got you on the ropes, don't get mad, don't try to act like more than you are. Everyone here is more than willing to accept you for who you are and what you have, regardless of who paid for it.
Just let it go, maybe say you are sorry and go on.
But pissing people off here is bad in the long run, one day you might need advice, or help and the one person who could have helped you may have been the very one you pissed off.
Just let it go, maybe say you are sorry and go on.
But pissing people off here is bad in the long run, one day you might need advice, or help and the one person who could have helped you may have been the very one you pissed off.
- NCSU
Last edited by NCSU_05_FX4; 11-03-2010 at 12:34 PM.
#4
11-03-2010, 12:35 PM
Edited.
I thought your username looked familiar.... You were the little jerk-off from this thread:https://www.f150online.com/forums/ap...-please-2.html
Apparently Titan can see the future.
- NCSU
I thought your username looked familiar.... You were the little jerk-off from this thread:https://www.f150online.com/forums/ap...-please-2.html
Apparently Titan can see the future.
- NCSU
^^
to NCSU & Titan!MGD
Last edited by MGDfan; 11-03-2010 at 02:10 PM.
#5
11-03-2010, 03:11 PM
Join Date: Jun 2010
Location: Louisiana
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
What kit did you order from them? If you ordered an H13, it should have came with the right connector, regardless of being bi-xenon or not. Did it come with the same connection as the fog light kit (9005/9006/9145/H10)?
What kind of bulbs came with the kit? Do they move in and out on a spring within the base of the bulb?
What kind of bulbs came with the kit? Do they move in and out on a spring within the base of the bulb?