2004 F150 airbag code 42
#1
#2
Originally Posted by tmg6600
I have a 2004 F150 and I get a code 42 on the airbag system. I know this is a front impact sensor. Where is it located and what does it look like. Is this something I have to take to Ford to have fixed? Or can I do this.
#4
Code 42
I checked the impact sensor and found it was cracked just below the plug-in. The whole sensor was corroded. I ordered one from Ford. $46.00. I was expecting more. I won't get it until Wed. but it should cure the problem.
The trouble code was given to me by the truck. Once I started it, the airbag light would blink 4 times,pause and then blink 2 more times, then there would be a longer pause then start the sequence over. Then stay on all the time.
The trouble code was given to me by the truck. Once I started it, the airbag light would blink 4 times,pause and then blink 2 more times, then there would be a longer pause then start the sequence over. Then stay on all the time.
#5
#6
Airbag light 42
Hi,
I own a 2004 F-150 and have the same 42 airbag code on. I wanted to check the sensor. I disconnected the battery and removed the bolt retaining the sensor. When I tried to disconnect the sensor, it broke in two parts. My question is : Can I try to reconnect the battery and use the truck without problem or will it cause the deployment of the airbags if I receonnect the battery and start the truck ?
Regards,
Martin
I own a 2004 F-150 and have the same 42 airbag code on. I wanted to check the sensor. I disconnected the battery and removed the bolt retaining the sensor. When I tried to disconnect the sensor, it broke in two parts. My question is : Can I try to reconnect the battery and use the truck without problem or will it cause the deployment of the airbags if I receonnect the battery and start the truck ?
Regards,
Martin
#7
Join Date: Oct 2002
Location: St. Louis (Out in the woods)
Posts: 7,247
Likes: 0
Received 104 Likes
on
97 Posts
Hi,
I own a 2004 F-150 and have the same 42 airbag code on. I wanted to check the sensor. I disconnected the battery and removed the bolt retaining the sensor. When I tried to disconnect the sensor, it broke in two parts. My question is : Can I try to reconnect the battery and use the truck without problem or will it cause the deployment of the airbags if I receonnect the battery and start the truck ?
Regards,
Martin
I own a 2004 F-150 and have the same 42 airbag code on. I wanted to check the sensor. I disconnected the battery and removed the bolt retaining the sensor. When I tried to disconnect the sensor, it broke in two parts. My question is : Can I try to reconnect the battery and use the truck without problem or will it cause the deployment of the airbags if I receonnect the battery and start the truck ?
Regards,
Martin
Steve
Trending Topics
#9
#10
#11
I got a secuence of beeps 5 beeps 5 times usually every half hour of driving time. The light of the srs on top of the radio does not work and its driving me insane. Its the light that turns on or off depending on if a passenger is sitting. Also this started when a thief ripped out mu radio and messed up the console. I bought the light but i domt know where to run the wires to patch this since it seems something is not connecting. Any help will be greatly appreciated.
#12
Join Date: Jun 2002
Location: Under the flightpath of old ORD 22R
Posts: 10,511
Likes: 0
Received 7 Likes
on
7 Posts
If you are talking about a 2004 -2008 My truck ( profile not completed ), you have what appears to be 2 things wrong.
1. The 5x5 beeping is the SRS lamp in the cluster is out, and needs to be replaced.
2. Once you replace this you will get a LFC ( light Flash Code ) that will show you what else is wrong. The LFC I would imagine is going to point to the broken PAD ( Passenger Airbag Deactivation ) lamp, but you need to get the bulb in the cluster working 1st to confirm this.
This is assuming this is not the seat belt ding, do you have the driver's seat belt on when this is happening ?
If you turn the key from off to run ( do not start ) does the SRS lamp illuminate ?
1. The 5x5 beeping is the SRS lamp in the cluster is out, and needs to be replaced.
2. Once you replace this you will get a LFC ( light Flash Code ) that will show you what else is wrong. The LFC I would imagine is going to point to the broken PAD ( Passenger Airbag Deactivation ) lamp, but you need to get the bulb in the cluster working 1st to confirm this.
This is assuming this is not the seat belt ding, do you have the driver's seat belt on when this is happening ?
If you turn the key from off to run ( do not start ) does the SRS lamp illuminate ?
#13
Sscully, thank you for the help. I went to the dealership and bought the light. ( the one i had was blown ) , also had to replace the fuse 27. 19 was ok. And now the srs light turns on once i ppwer the car up , and no sounds or lights at all. Thank you. Now im gonna try to replace the spark plugs on this beast.
#14
#15
Any help would be great
If you are talking about a 2004 -2008 My truck ( profile not completed ), you have what appears to be 2 things wrong.
1. The 5x5 beeping is the SRS lamp in the cluster is out, and needs to be replaced.
2. Once you replace this you will get a LFC ( light Flash Code ) that will show you what else is wrong. The LFC I would imagine is going to point to the broken PAD ( Passenger Airbag Deactivation ) lamp, but you need to get the bulb in the cluster working 1st to confirm this.
This is assuming this is not the seat belt ding, do you have the driver's seat belt on when this is happening ?
If you turn the key from off to run ( do not start ) does the SRS lamp illuminate ?
1. The 5x5 beeping is the SRS lamp in the cluster is out, and needs to be replaced.
2. Once you replace this you will get a LFC ( light Flash Code ) that will show you what else is wrong. The LFC I would imagine is going to point to the broken PAD ( Passenger Airbag Deactivation ) lamp, but you need to get the bulb in the cluster working 1st to confirm this.
This is assuming this is not the seat belt ding, do you have the driver's seat belt on when this is happening ?
If you turn the key from off to run ( do not start ) does the SRS lamp illuminate ?
so on my truck the srs will not illuminate during the cluster lamp check. It will come on every few weeks and blink 4-2. My cruise control went out the same time the srs lamp first came on are they tied together by the computer somehow? My srs lamp appears to be an led soldered to the cluster board. Do I replace the led or the whole cluster? I need the 5x5 beeping to stop!!!! Lol. Thanks in advance
Last edited by CatDrag; 06-22-2021 at 05:34 PM.