2007 F-150 SCrew wiring diagram
#1
2007 F-150 SCrew wiring diagram
I have been waiting for Haynes or Chiltons to come out with a repair manual for the 2007 Ford F-150 to get the wiring diagrams. I emailed Haynes and they said that they don't have plans to come out with a manual for the 2007's. I was wondering if the electrical diagrams in the 2004-2006 manual would be the same for the 2007. I've ordered a set of driving lights to install and I'd like to install the correct headlamp switch and would have to make my own wire harness as my truck doesn't have the foglamp wiring on it. There are a few different ways I can wire them up, I just need the color coding on the wires so I know which one(s) I need to tap into. I've installed driving lights on my old '94 F-150 so I'm savvy on how the electrical system works. Any help would be much appreciated.
Thanks
Thanks
#2
Join Date: Oct 2002
Location: St. Louis (Out in the woods)
Posts: 7,247
Likes: 0
Received 104 Likes
on
97 Posts
Download both pdf files.
http://www.mediafire.com/?zd1bxedbxlc
http://www.mediafire.com/?hn1nnzbd9w3
Steve
http://www.mediafire.com/?zd1bxedbxlc
http://www.mediafire.com/?hn1nnzbd9w3
Steve
#3
#4
Join Date: Oct 2002
Location: St. Louis (Out in the woods)
Posts: 7,247
Likes: 0
Received 104 Likes
on
97 Posts
Steve
Last edited by projectSHO89; 08-04-2008 at 08:39 AM.
#6
I bought my factory service manuals for my 07 off ebay. they also came with the wiring diagrams. I got them for about $100 I think they run $600 new.
http://cgi.ebay.com/ebaymotors/2007-...spagenameZWD1V
http://cgi.ebay.com/ebaymotors/2007-...spagenameZWD1V
Last edited by wreedKR; 08-04-2008 at 08:58 PM.
#7
Trending Topics
#10
Well I finished installing the driving lights in the slot of the bumper. It came out better than I expected. I took pictures of the mounting frame that the lights are attached to. I'll post pictures soon as soon as I figure out how to get them on here. I have them wired to a remote on/off switch. I would still like to get the correct OEM foglamp switch for the dash but am unsure if the truck wire harness is prewired going to the OEM foglamp relay slot. I would hate to buy the switch and find out there is no wire as my truck didn't come prewired for foglamps. I did a search but couldn't find out how to remove/replace the headlamp switch. I am also looking for a grommet in the firewall to run the wire I plan on tapping into for the driving lights so I can turn on the lamps with the high beams on also. Anymore help would be much appreciated.
Thanks, David
Thanks, David
Last edited by DJ2007; 08-07-2008 at 06:46 PM.
#11
These new driving lights made a huge difference. Friday morning the lights were a little low so i adjusted them up. Well this morning I kept blinding everyone. I made another adjustment and I'll see tomorrow morning how they do with oncoming traffic. I still plan on posting pictures so be patient .
David
David
#12
I finally got the pictures.
Well I guess the pictures won't work. I've downloaded them to my photo album but don't know how to post them here.
https://www.f150online.com/forums/me...ights-003.html
https://www.f150online.com/forums/me...ights-002.html
https://www.f150online.com/forums/me...ights-001.html
Well I guess the pictures won't work. I've downloaded them to my photo album but don't know how to post them here.
https://www.f150online.com/forums/me...ights-003.html
https://www.f150online.com/forums/me...ights-002.html
https://www.f150online.com/forums/me...ights-001.html
Last edited by DJ2007; 08-30-2008 at 08:27 PM.
#14