Right Turn Signal Blinking Fast, Hazards Not Working

Thread Tools
 
Search this Thread
 
  #1  
Old 01-14-2008, 09:52 AM
bearcatscott's Avatar
Junior Member
Thread Starter
Join Date: Jan 2008
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Right Turn Signal Blinking Fast, Hazards Not Working

I have a 97 F150 and the right front turn signal light does not blink and I get a fast blinking sound when I turn it on. I replaced the bulb and it lights up but does not blink. I also noticed that the hazard lights do not come on at all when I depress the hazard button. Nothing at all happens no clicking sound no flashing lights. Any ideas?
 
  #2  
Old 01-14-2008, 10:58 AM
j2h1's Avatar
Senior Member
Join Date: Jun 2007
Location: SCPA
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts
I would say it is the flasher relay gone bad.
 
  #3  
Old 01-14-2008, 03:37 PM
rb4123's Avatar
Senior Member
Join Date: Jan 2007
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by j2h1
I would say it is the flasher relay gone bad.
Or a fuse is blown, check and replace both if needed.
 
  #4  
Old 01-14-2008, 11:35 PM
hineighbor's Avatar
Junior Member
Join Date: Jan 2006
Location: alexandria, virginia
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
same thing - but different

same thing just happened to me today. right rear signal went out. when i went to signal the dash signal was flashing reallly fast. guess it's the way ford engineered it to let you know a bulb's out. btw my front signal and sideview mirror signal still work. the sideview was flashing fast as well. i'm assuming it's just the bulb. adam
 
  #5  
Old 01-21-2008, 10:48 PM
juni1971's Avatar
Junior Member
Join Date: Jan 2007
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
I had the same problem. I replaced the multi-function turn signal, cruise control, wiper switch. It worked well for 2 weeks and same thing started happening again. I removed it again today and it turns out it is the connector. The clips that hold the connector iin place are broken. When the signals didn't work I wiggled the connector and they started working. I ordered the wire loom today and it cost around $40. Will get it tomorrow and I'll let you know if it worked. i'm pretty sure this is your problem because you say your hazards didn't work either. That was my exact same problem.
 

Last edited by juni1971; 01-21-2008 at 10:50 PM.
  #6  
Old 01-27-2008, 09:56 PM
Kryptonite.'s Avatar
Member
Join Date: Jan 2008
Location: Conroe\Woodlands\Houston, Tx
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
I think you just need some Blinker Fluid, http://kalecoauto.com/index.php?main...&products_id=6

That should fix it

 



Quick Reply: Right Turn Signal Blinking Fast, Hazards Not Working



All times are GMT -4. The time now is 04:03 PM.