compass zones and calibration

Reply Subscribe

Thread Tools

Search this Thread

01-10-2005, 03:01 PM

dembones fx4

Junior Member

Thread Starter

Join Date: Jan 2005

Location: Orange County, Ca.

Posts: 2

Likes: 0

Received 0 Likes on 0 Posts

compass zones and calibration

Does anyone know what the zones are for the compass. I live in So. Ca.
Also, how to calibrate compass?

Reply Like

01-10-2005, 05:12 PM

TonyPTX

Senior Member

Join Date: Jul 2003

Location: New Orleans, LA

Posts: 557

Likes: 0

Received 0 Likes on 0 Posts

Re: compass zones and calibration

Quote:

Originally posted by dembones fx4
Does anyone know what the zones are for the compass. I live in So. Ca.
Also, how to calibrate compass?

Both items should be in the owners manual. So. Cal is Zone 5 (Page 79) and calibration procedures can also be found on Page 79.

Quote:

Compass calibration adjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration
mode, press and hold the button for
greater than eight seconds. The
display will then show CAL in the
display window.
3. Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until
CAL indicator turns off. As many as 5 complete circles may be required.
4. The compass is now calibrated.

Last edited by TonyPTX; 01-10-2005 at 05:25 PM.

Reply Like