HELP!! Power mirrors wiring diagram needed!
#1
HELP!! Power mirrors wiring diagram needed!
I am working on a 1997 F150 Flareside and need a wiring schematic for the power mirrors.
The truck was trashed when I got it and I have had to rewire both doors from scratch. I've got everything working except the mirrors, and there is no schematic for them in my Haynes Manual.
Any help would be GREATLY appreciated.
Thanks in advance.
Dean Rudenauer
Azusa, CA
The truck was trashed when I got it and I have had to rewire both doors from scratch. I've got everything working except the mirrors, and there is no schematic for them in my Haynes Manual.
Any help would be GREATLY appreciated.
Thanks in advance.
Dean Rudenauer
Azusa, CA
#3
Thanks for the picture but...
the resolution on the picture is too low to read the switch numbers. Is it possible to post a larger version of the picture, or, being new to the forum and not knowing if there are picture size limitations, you could send the original to me directly at rudenauer@earthlink.net.
Just looking at the first picture you sent, I can tell that this is EXACTLY what I needed. Thanks again!
Dean Rudenauer
Azusa, CA
Just looking at the first picture you sent, I can tell that this is EXACTLY what I needed. Thanks again!
Dean Rudenauer
Azusa, CA
#6
Join Date: Oct 2002
Location: St. Louis (Out in the woods)
Posts: 7,247
Likes: 0
Received 104 Likes
on
97 Posts
That is the Electronic and Vacuum Troubleshooting manual (EVTM).
They are available new from www.helminc.com
If you are patient, you can usually find a used one on eBay for half of the cost of a new.
Steve
They are available new from www.helminc.com
If you are patient, you can usually find a used one on eBay for half of the cost of a new.
Steve
#7
4WD headache!!!!
Hey JMC I'm desperate for any help I can get. Is the chassis wiring diagram for the 1997 F150 Lariat in that book and if so could I get a copy of the diagram? My email is dreamsr@yahoo.com. I need it because my truck is stuck in 4wd low and won't come out. We checked the motor and its working but the relay I hear it clicking when its trying to release the 4wd but I can't find the relay so I was wondering if I could get the wiring diagram to locate it.