Edge/Gryphon owners. Need code help.

[JNC995]

Anyone know the tire code for 285/75 16 that you enter into the tuner? Its in the book, under the tire codes. I just can't find my book. Any help is appreciated.

Register today or sign-in to remove these ads!

[FX4life]

you can open it as a .pdf on the computer. I say that cause I don't have mine either

[JackandJanet]

Originally Posted by JNC995

Anyone know the tire code for 285/75 16 that you enter into the tuner? Its in the book, under the tire codes. I just can't find my book. Any help is appreciated.

The "book" value would be: 2619 mm, but that doesn't account for tire "squish". I've found a 3% squish factor works for me, so I'd change it to 2619 x 0.97 = 2540mm. Use that as a starting point. If your indicated speed is too high, reduce it, if too low, increase it.

- Jack

[FX4life]

Originally Posted by JackandJanet

The "book" value would be: 2619 mm, but that doesn't account for tire "squish". I've found a 3% squish factor works for me, so I'd change it to 2619 x 0.97 = 2540mm. Use that as a starting point. If your indicated speed is too high, reduce it, if too low, increase it.

- Jack

In my case I started at 3% squish and jumped all over then finally found that 2848 (can't remember the % value of squish off the top of my head) is about 1mph off on the speedo.

[cstanek]

Originally Posted by FX4life

you can open it as a .pdf on the computer. I say that cause I don't have mine either

Here: http://www.edgeproducts.com/product_...manual-277.pdf

Or, here: http://www.edgeproducts.com/product....ion+Programmer (click on USER MANUAL to download)

[JNC995]

Thanks for the replys. Had a road trip, and wanted to make sure I had the right code in, and I couldn't find my book.
I went inbetween the 3% squish and the book number, and got it within 1 from my gps mph, so thats good enough for me.

Thanks for the help