Bedliners, Caps, Tops & Lids
Sponsored by:
Sponsored by:

Will topper for 97-03 fit a 04?

Thread Tools
 
Search this Thread
 
  #1  
Old 04-24-2011, 03:09 PM
gatref's Avatar
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Will topper for 97-03 fit a 04?

I'm sure this has been asked before, but will a canopy from 97-03 with a 6.5' bed fit an 04 with a 6.5' bed?
 
  #2  
Old 04-24-2011, 03:32 PM
fordfx4guy's Avatar
Senior Member
Join Date: Feb 2011
Location: Plano, Texas
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
As long as it's not a step side then your good to go
 
  #3  
Old 04-24-2011, 06:44 PM
Raptor05121's Avatar
Technical Article Contributor

Join Date: Jan 2007
Location: Live Oak, FL
Posts: 10,610
Likes: 0
Received 6 Likes on 4 Posts
Are you sure? The bed rails are different- it may not fit snugly
 
  #4  
Old 04-24-2011, 08:19 PM
gatref's Avatar
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the quick reply. Anyone have some exact specs on the difference between the bedrails.
 
  #5  
Old 04-24-2011, 10:43 PM
Raptor05121's Avatar
Technical Article Contributor

Join Date: Jan 2007
Location: Live Oak, FL
Posts: 10,610
Likes: 0
Received 6 Likes on 4 Posts
its on here somewhere, search
 
  #6  
Old 04-27-2011, 11:13 PM
holler1's Avatar
Member
Join Date: Apr 2011
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
I need to know the reverse - will a cap from an 04 Ford F150 SuperCab (6.5 ft. bed) fit my 2000 f150 Lariat extended cab 6.5 foot bed? I found a nice looking cap on an 04. I searched for specs on the site as someone suggested and the only thing I could find is on the kanopykingdom site, which lists overall bed dimensions and cab rake. From that it looks like the cab rake is the same, but the 04 bed is 3/4" longer and 3" wider at the front, same width at rear. It seems to me the difference in front width could be an issue. How are the bed rails different?
 
  #7  
Old 04-28-2011, 02:17 AM
Raptor05121's Avatar
Technical Article Contributor

Join Date: Jan 2007
Location: Live Oak, FL
Posts: 10,610
Likes: 0
Received 6 Likes on 4 Posts
I'm not sure of the new trucks, but looking down my side mirrors, you can in fact see the bed rails bend. On a top down view, it looks just like the parenthesis , but at less of an angle at either ends--> ( )
 
  #8  
Old 04-28-2011, 09:33 PM
holler1's Avatar
Member
Join Date: Apr 2011
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
On my 2000, the inside of the rail looks dead straight, and the outside bows out a bit in the middle, maybe an inch or so, so it's wider in the middle.
 
  #9  
Old 04-29-2011, 11:48 AM
fordfx4guy's Avatar
Senior Member
Join Date: Feb 2011
Location: Plano, Texas
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
The 2004 is a complete different body style so I don't really think it will fit your 2000
 
  #10  
Old 04-29-2011, 10:13 PM
holler1's Avatar
Member
Join Date: Apr 2011
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by fordfx4guy
The 2004 is a complete different body style so I don't really think it will fit your 2000
I think you're right. The 3" difference in width at the fronts seems like too much. If I find one that's close I might try measuring it. All I've found so far are 2 hrs drive away.
 
  #11  
Old 04-29-2011, 10:21 PM
fordfx4guy's Avatar
Senior Member
Join Date: Feb 2011
Location: Plano, Texas
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Ya cuz 3inches is alot when it come to stuff like that and it will prob hang off the sides
 
  #12  
Old 05-01-2011, 06:05 AM
animated_zombie's Avatar
Senior Member
Join Date: Apr 2009
Location: St. Louis, MO
Posts: 1,313
Likes: 0
Received 1 Like on 1 Post
If you are talking about early 2004 (OBS) then I don't see the problem. If you are talking about 2004.5 (NBS) then you'll end up with this:



I didn't keep it very long because I couldn't get over the poor fitment. I hope the picture helps you figure it out.
 
  #13  
Old 05-03-2011, 11:10 PM
topperman's Avatar
Member
Join Date: Jan 2008
Location: Vancouver, BC, Canada
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Topper fit?

animated zombie...that picture pretty much sums that issue. Bad fit!
 



Quick Reply: Will topper for 97-03 fit a 04?



All times are GMT -4. The time now is 03:31 AM.