Well darn. I really dont like the look of the Fog-light switch.

 

I am going to take a stab in the dark here but I am going to guess that You don't have any kind of aftermarket alarm do you fairlaner. (no need to answer)

just to let you people who have an aftermarket alarm that flashes your parking lights when you arm the alarm, i just tried to do the wire part of this and when I locked/arm'd my truck it flashed my HIDs, I immediately disconnected the mod, I will see if i can find another way to wire it to get the desired results. and I will keep you posted on what I find if anything.

 

Follow Raptor's how to about the LED cluster swap, he goes into detail about how to take apart the driver's half of the dash.

https://www.f150online.com/forums/ar...r-97-03-a.html



Is it just your camera/lighting, or do you have a blue dash board?

 

nice

 

I never considered the effects of the mod on vehicles w/ alarms/remote locks (I've never owned a vehicle w/ either). I'm sure there's some sort of electrical solution for this problem (possible a diode ... I pretty weak on electrical). Ask over in the Electrical Forum, someone over there can probably help you out. If you get a solution, could you post a link to it in this How-To thread?

 

Some one help. i cant get my ramp out far enough to chissel it. my 01 screw headlights.
i pulled it apart but cant get my chissel out of the case far enough to chissel the ramp..
ideas?

 

nevermind. i got frustrated and pulled real hard at it and the turn **** popped off the faceplate. got it to come off but now i gota glue my **** back on lol

 

how do i splice the wires together?

 

Do you have auto lamps on your truck? I want to do this mod to mine, but I need to know if it's any different. I don't have auto lamps.

 

ya i have auto lamps. i have an 01 tho so i didnt use this article i used the 00-03 link that was in this article.

 

Does the process change any if I don't have auto lamps?

I still want to be able to turn my fogs on and off with the switch, but I want to be able to do it in both park and head.

 

no its no different you just skip the autolamps part.

 

So do I need to pop the collar and file? Or just pop the collar?

 

if you want the fogs with your off swith/parking lots/ you will have to file the plastic off. then wire splicing.

if your just wanting to have fogs and brights on at same time just do the splice wiring part and not the physical part.

 

Does anyone know how to splice wires? can you walk me through it or post pictures for assistance??