Heated O2 Sensor Circuit Malfunction, Error Code P0156

Thread Tools
 
Search this Thread
 
  #1  
Old 08-30-1999, 07:49 PM
ace's Avatar
ace
ace is offline
Member
Thread Starter
Join Date: Jul 1999
Location: IL
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Post Heated O2 Sensor Circuit Malfunction, Error Code P0156

I read an error code from my truck computer. The following error code was displayed, P0156 Heated O2 Sensor Circuit Malfunction (Bank 2, Sensor 2) I reset the check engine light. I am sure it will come on again after I do some highway driving. Does anyone have any suggestions how to go about fixing this problem without shelling out the big $$$ to have Ford fix it.


Thanks....
 
  #2  
Old 08-30-1999, 10:49 PM
Bill_Aquino's Avatar
Member
Join Date: Feb 1999
Location: Highland Lakes NJ USA
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Post

It's probably one of the oxygen sensors, there are 4. Two are ahead of the catalytic converters, 2 are aft of them. Not sure exactly which one the code points too, but it is probably one of the ones behind the converters. If you clear the code and swap the two aft sensors, you should be able to verify this by the new error code that will be generated. The sensors are relatively easy to change, and are worth about $60 each, and they are available over the internet.
 
  #3  
Old 08-31-1999, 12:01 AM
Squanto804's Avatar
Senior Member
Join Date: Aug 1999
Location: Rocheport, Mo
Posts: 290
Likes: 0
Received 0 Likes on 0 Posts
Post

PO156 is the downstream(past the cat. towards the rear) Bank 2 which is left side (drivers side). Mine recently showed code PO141 so I purchased a sensor through Ford($75) And it took care of the problem(mine was downstream, bank 1). I asked Ford if they could check the sensor which was in hand and they told me that it had to be in the truck and would cost about $80 to check it. I don't know if this was to pull the code or if they would actually check the sensor itself? If your thinking of buying a sensor you might want to check out www.carparts.com, they have sensors by Bosch for Ford trucks for about $40. Don't know if this helps you or not but good luck.

------------------
97 F-150 Black, 4x4 XLT ext.cab,sb,offroad pack.
4" Susp. lift, 3" body
4.56 gears w/LS,Borla exhaust
35" BFG.,16.5x9.75 Weld Scorpio V wheels, Edelbrock IAS Shocks,Lift Lips,
K&N Filter, TransGo Shift kit,
Bug shield,Tinted windows
Sony ES head unit,Sony ES changer,MTX Thunderform sub,Boston Acoustic Proseries up front, Polk in rear,PPI & Coustic Amps,Alpine Alarm



[This message has been edited by Squanto804 (edited 08-31-1999).]
 
  #4  
Old 09-03-2009, 10:00 PM
GTME85's Avatar
Junior Member
Join Date: Aug 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
What method do you use to easily change the sensors. I have the tool, prelubed the threads, and ran engine to warm things up.Any other ideas?
 
  #5  
Old 09-04-2009, 01:48 AM
ONELOWF's Avatar
Senior Member
Join Date: Jun 2005
Location: NEVADA
Posts: 2,805
Likes: 0
Received 2 Likes on 2 Posts
Wow! A ten year old thread.
 
  #6  
Old 12-06-2009, 11:57 PM
Redline_cdn's Avatar
Junior Member
Join Date: Mar 2009
Location: Toronto Area
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ONELOWF
Wow! A ten year old thread.
I just got this code on my F150 and all I can say is "love that search function"
cause I didn't know which bank was which and was thinking bank 2 was
the passenger side until I searched the forums.
10 yrs old or not, I got my answer.

Thanks F150online
 
  #7  
Old 12-07-2009, 06:03 AM
jbrew's Avatar
Technical Article Contributor

Join Date: Oct 2005
Location: MI
Posts: 25,637
Likes: 0
Received 15 Likes on 15 Posts
Originally Posted by ONELOWF
Wow! A ten year old thread.
Another One ? Holey Crap Man... Yea, someone or some thing has released Bugfarky toxins into the frickin air. Somethins goin on..
 



Quick Reply: Heated O2 Sensor Circuit Malfunction, Error Code P0156



All times are GMT -4. The time now is 08:37 PM.