I'm getting ready to sew out my head rests today...it cold and rainy here in cleveland so I thought I'd spend some time sewing..yeah I said sewing no laughing.I just got done with the pattern and will be sewing it out on a piece of leather before actually doing the headrest.Mistakes aren't tolerated.I had 2 patterns in mind..one said F-150 with lariat below it..kinda typical.. and this one that I think I like better..this one the wife actually did..What do you think..she did the fill patern on the rope to look like rope and I picked the fill on the f-150...The fills make the design.anyway I'm gonna go sew out the sample now..just curious as to your opinions.
Just got done with the sample..Its sewn out on a piece of marine grade interior vinyl which is the same texture as the leather.this way I know how it will lay and what edits have to be done.
__________________ Posttal AKA Ralph
Cleveland,Ohio http://s760.photobucket.com/albums/xx245/posttal/
Mechanic 4 U.S.P.S.
Master certified for 25 yrs
2006 F150 Lariat
HID lights
Embroidered headrests
Code alarm remote start
Avic X910bt head unit
Rear camera
Gryphon tuner
Chrome pillar posts and door handles
Bull bar
etc..etc
Thanks Watson91 at S-FX
PTM Century Tonneau
Remote Start 14" si/do Magnaflow 45'd behind rear tires
4" x 18" SS Tips
Roush Grille
Billet Bumper Grille
PTM Mirror caps
DVW Intake w/ K&N drop in
Quote:
Originally Posted by 05RedFX4
Best of luck to you, and hopefully you don't have the same attitude when you go into the dealer to get your trans fixed, because if you do your gonna need a big jar of vaseline cause they are gonna stick it to you, HARD
Yeah I could..But I wanted to get the Lariat aspect accross instead of just a rope look.
I have decided to do this in 2 colors...The "Lariat" in a color close to what you see but the f-150 in a pewter gray to match the pewter gray console trim and dash trim on the truck.As soon as the wife and I do lunch I'm gonna sew another sample and see how it looks...then its time for the actual headrests if it looks good.
__________________ Posttal AKA Ralph
Cleveland,Ohio http://s760.photobucket.com/albums/xx245/posttal/
Mechanic 4 U.S.P.S.
Master certified for 25 yrs
2006 F150 Lariat
HID lights
Embroidered headrests
Code alarm remote start
Avic X910bt head unit
Rear camera
Gryphon tuner
Chrome pillar posts and door handles
Bull bar
etc..etc
Hey TG150..After stairing at this I think your right.I took out the laso and am going to make the end look like a whip instead of a laso ending about over the dot in the i
__________________ Posttal AKA Ralph
Cleveland,Ohio http://s760.photobucket.com/albums/xx245/posttal/
Mechanic 4 U.S.P.S.
Master certified for 25 yrs
2006 F150 Lariat
HID lights
Embroidered headrests
Code alarm remote start
Avic X910bt head unit
Rear camera
Gryphon tuner
Chrome pillar posts and door handles
Bull bar
etc..etc
Yeah I could..But I wanted to get the Lariat aspect accross instead of just a rope look.
I have decided to do this in 2 colors...The "Lariat" in a color close to what you see but the f-150 in a pewter gray to match the pewter gray console trim and dash trim on the truck.As soon as the wife and I do lunch I'm gonna sew another sample and see how it looks...then its time for the actual headrests if it looks good.
I was thinking the F150 needed to be in a different color as well. Be sure to post up pictures when you get it done.
__________________ 2009 F150 Platinum SCrew, Black / Black, 3:73 Limited Slip, SONY Navigation System, Power Moonroof, Max Trailer Tow, Tailgate Step, Mods
Hey TG150..After stairing at this I think your right.I took out the laso and am going to make the end look like a whip instead of a laso ending about over the dot in the i
Awsome idea I was also thinking.. Can you make one that says F-150 in the font like on the fenders and make "Lariat" smaller below it off to the side etc? Might have to send you mine to do
2009 SCrew XLT 4x4, Tint, Black emblem overlays, Goodyear Wrangler Silent Armor Tires on ATX Predators,
Line-X, Bakflip HD Tonneau, Ruff 'N Tuff bed extender, Catch-all mats in front, Weathertech mat in back,
Magnaflow (16520) SIDO Dual Splits, Akebono ceramics front and back, Clifford 20.7x Remote Starter,
HD/Raptor Heads and Tails, Tailgate popper with EZ Down: http://www.youtube.com/watch?v=V85J6eKXfRo
__________________
2000 F150 4x4 XLT 5.4, 77 Series K&N, Gibson Super Sport Exhaust, Edge Evolution Programmer, Alpine DVD Player, 16x10 Chrome DC 1 Cepeks, 33" Nitto Terra Grapplers, and on..
Videos of My Truck http://www.youtube.com/user/ninerrulz
__________________
Ryan
Thanks to SFX.net 1999 F-150 XLT SCAB 4x4 Mods:BBK Shorty Headers, 33" Yokohama Geolandar MT+, Airaid CAI, Cherry Bomb Glasspack, AVS Bugflector II, Tailgate LED light bar, Sony XPLOD Bluetooth HU, Pioneer Speakers, MTX Thunder Subwoofers, Sony 1100W Amp, ETC. Soon To Come: RCX 5" Suspension Lift, And Lots More. Check Out My Progress Thread: Progress Thread 99' F150 Ram This FORD Dodge Boy!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company
Linear Mode
