Front end parts
#1
Front end parts
Hello everyone. I got a 2001 Scab short bed 4x4 5.4 with a 3 inch suspension ans 3 inch body lift on 35s. Third owner of the truck at 138k miles. Anyhow need to rebuild the front end. I was on ebay looking at a rebuild kit for 179.00, does anyone have any experience with these? They are fully greaseable and two year warr. I was searching on here for some info and just found out that the moog uca while it appears servicable moog does not offer a replacemnet joint. I don't wheel my trucks other than the ocasional dirt road and actually will be going down to 33 inch tires and taking the body lift off as well. To get back on target anyone have any input?
Thx
Danny
Thx
Danny
#4
#6
#7
Trending Topics
#8
Its not a tortion bar lift, I don't know exactly what kind of lift it is but it has a crossmember peice. That bolts to the factory stuff along with a spacers on top of the knuckle. It looks like the rear springs are aftermarket as there are no blocks. 3 inch is my best guess because the body lift measured out to close to three and I was told it lifted six inches and just did the simple math.
#10
Its not a tortion bar lift, I don't know exactly what kind of lift it is but it has a crossmember peice. That bolts to the factory stuff along with a spacers on top of the knuckle. It looks like the rear springs are aftermarket as there are no blocks. 3 inch is my best guess because the body lift measured out to close to three and I was told it lifted six inches and just did the simple math.
#14