3/4 ton coil springs on 150
#1
3/4 ton coil springs on 150
hey i was just wondering if anyones done this to their truck. i got a 93 150 independent 4x4. does anyone know if i go out to a junkyard and get some coil springs off a f250 will they fit on my 150 and will they lift it any or will it just be a rougher ride? im just trying to level it out the cheapest way possible
#2
#3
Look at leveling kits that just relace the front coils and shocks. Pretty inexpensive, and only lift the front end 1-1.5 inches. There is another thread here somewhere that shows the "lift".
found it...
https://www.f150online.com/forums/pr...lled-pics.html
found it...
https://www.f150online.com/forums/pr...lled-pics.html
Last edited by S-crew03; 01-15-2010 at 07:18 AM.
#5
#6
#7
Trending Topics
#9
thanks for the replys. i thought the 250s came with coils and the 350s had leafs but i was wrong i just did my research. i already tried the spring spacers but got about 1/2 an inch lift. i guess i'll just save up and go with the leveling kit. problem is im a full time student and work part time for minimum wage.
#11
#12
Aside from lowering it they would most likely ride rough as they're made to hold up a 1000lb engine.
If there is an F250 with coils and a 4x4 TTB out there it isn't factory. Ford never built it with anything but leaves. More than likely someone stuck F250 badges on it and/or put wheel adapters on an F150.