I have 06 4x4 with a 6" pro comp lift and i am running 35s and i was thinking of putting 37s on my truck i want to know if they will fit and if i can run them without changing gears and if they will affect my warranty.My wheels are 20x10 with 4.5 bs and the tires i want to put on are 37/13.50/20.I also have a 2" leveling kit spacer like the kind that came with my lift can i bolt both of them together to lift truck up 2 more inches ?

 

i think if you run it with 6 inches it will rub like crazy...i have a 6 inch fabtech and plan to run 37's in the future and I am slapping a 2" AS spacer up front and a bigger block in the rear.

 

i have the stage 1 pro comp on my 06 with the bilstien 5100 shocks cranked for an extra 2'' up front the a 4'' skyjacker aad in the rear on top of the pro comp block. i am runnin 37s. im not sure how your gears will hold up i regeared before the 37s. but im pretty sure it would void the warranty due to all the extra stain your truck will be under.

 

Most people will agree that it's not a good idea to stack spacers. If you want to lift your truck up another couple of inches it's best to get the adjustable bilsteins, that would be the best way to fit your 37's unless you want to dish out money for new coilovers. And I wouldn't run 37's with stock gears for too long otherwise your tranny is gonna be hurting.

 

i don't know about on the nbs but on my 2002 i ran 37's with just a 3" body lift and a leveling kit for about 50,000 miles. now i have a 6" suspension added with 38"s with about 80,000 miles and still have not regeared. i do suggest regearing, i just have not put the time in yet and havn't had any problems.

 

you have a 4" skyjacker aal? do they make that?

 

i ran that setup for like 3 months, it rubbed. about the same as my 40's rub now. its a bit of a pain at times but nothing too bad. heres a shot

 

is that a picture of your truck with a 6" lift ridin on 37s and also did u have a gear when you had the 37s

 

Yeah there can be no way they'll fit. My 35's Rub and I have a 6'' Pro Comp.

 

no you can fit them, just depends on the wheel specs. there is a guy on this site that runs 40's on a 9in. lift. just look up like two post there is a pic of one. i have a friend that runs 37's on a 6in. lift too.

 

New too this site hope yall like my truck.. haha









2003 fordf150 super crew xlt
4-5 inch rough country lift
3 inch body
37 inch mud grapplers
factory wheels
flow master dual

 

this post is irrelevant. the OP was looking for the 04-08 bs truck with 37's on a 6in. lift.

 

im sure no one cares that i posted that man..

 

Actually im sure they do. Im sure the OP doesn't care about your truck, he cares about his question getting answered. Make your own thread.

 

hahaha owned.