Here is a 2010 Audi A4 Sline, the customer requested the dealer not to prep the car. The dealer only took off the white film and packaging from Audi. We had a great surface to work with all that was required was to degrease some of the spots from the normal driving, a good claying, 1 step polish with Menzerna PO85RD and finally Collinite Insulator Wax with Swissvax Divine to top it.

As well as a new car prep the customer requested that we install a 3M PPF (custom cut) on his bumper, partial hood and fender, and mirrors.

Enjoy.

Products used:
Exterior:
Lusso AutoBathe
Uber Yellow Wash Sponge
Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer
Einszett Spray Wax
P21S Finish Restorer Metal Polish (on the tips)
Menzerna PO85RD
Collinite Insulator Wax
Swissvax Divine

Wheels and tires:
P21S Wheel Cleaner Gel
Swissvax Wheel Brush
Uber Wheel Brush
Uber Spoke Brush
Swissvax Pneu
Swissvax Autobahn

Tools:
Infratech 5300
Flex 3403
Porter Cable X7424XP
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Brushes
Cam Spray Pressure Wash and Cam Spray Foam Canon

Before shots:




Wheels were cleaned up by using P21S Wheel Cleaner Gel, with Swissvax Wheel Brush, Uber Wheel Brush, and good old microfiber towels

 

P21S Total Autowash was used on the bug and tar and some spots as pictured above on the hood and mirrors.





Lusso Auto Bath was used to wash the car.

 

Car was rinsed and Wheels all cleaned up




Clay bar after a couple passes


Polishing with Menzerna PO85RD and the Uber Green Pad

 

Rinse after polishing as we prep for the 3M PPF install


Final Touches on the Wheels


3M PPF Prep and Install




Fitting to the hood

 

Fender install - Film was lined up with the hood and then fitted and tacked down




Bumper install



Wax being applied with the PC 7424XP


Nice even coat of wax


Final shots of the car

 

Customer and friend inspected film with Dan

 

does that film just help to protect from chips and other debris on the road? and can you see the edges on it?

 

you are correct and yes you will see the edges on this particular job.

some people wrap the full fender and the full hood when we do those jobs you will not see the edges.

 

pretty cool. nice job

 

that's looks great can you come do my moms A8L

 

Great job you guys do some awesome work and get to work on some very nice cars.