i cant get my 06 screw out of 4 low!!

Thread Tools
 
Search this Thread
 
Old Oct 20, 2009 | 01:24 PM
  #1  
roaddog5150's Avatar
Thread Starter
|
Member
Joined: Oct 2008
Posts: 26
Likes: 0
From: ca
i cant get my 06 screw out of 4 low!!

hit some mud last night for a little while and popped her in 4 low. for some reason i cant get it out tried reverse, neutral...i dont know whats going on. any insight is much appreciated
 
Reply
Old Oct 20, 2009 | 03:37 PM
  #2  
MitchF150's Avatar
Senior Member
Joined: Mar 2001
Posts: 4,506
Likes: 6
From: Puyallup, WA
Standard Q, since you didn't say.... Did you have your foot on the brake while in Neutral and shift out?

Mitch
 
Reply
Old Oct 20, 2009 | 06:31 PM
  #3  
05RedFX4's Avatar
Technical Article Contributor
Joined: Mar 2005
Posts: 4,387
Likes: 9
From: OH-IO
To shift into 4 lo, place truck in neutral with foot on brake then move switch to 4 lo. To come out of 4 lo, shift into neutral w/foot on brake turn switch to 4 hi.

If that procedure does not work, then your shift solenoid on the t-case is sticking. Crawl under the truck and give the solenoid a good healthy love tap with a ball peen hammer, that should get it to move.
 
Reply
Old Oct 24, 2009 | 01:04 PM
  #4  
avfrog's Avatar
Senior Member
Joined: Oct 2009
Posts: 6,172
Likes: 1
From: Missouri
Mine done that once. I just kept jacking with it and it eventually came out. I don't remember if I had my foot on the brake or not though.
 
Reply




All times are GMT -4. The time now is 03:36 AM.