|
+1 ^^^
The pins are correct. Do you have factory fog lights? If so, there is no need to the extra switch unless you want them to be separate. Also, for that switch to work with the LED the #3 pin I believe needs to be grounded to that the LED will come on when the switch is in the on positions, minor compared to the other stuff mtylerb posted.
Also, make sure the power wire coming into the 30 pin is fused properly.
__________________
PHP Gryphon, 2.5" AS level, Strobes on all 4 corners, Black TS Toolbox, 15% tint all around, Pioneer AVH-P4100 with Low_e_red's relay bypass, MA Audio 1000w RMS 1 ohm amp pushing 2 - 10" ED subs under the rear seat, Viper 5901 with 530T auto up/down windows, Viair 380c at 165/200 PSI in a 3 gal tank pushing 1/2" DOT airline to my Siege Engineering train horns, and Beltronics RX 65 pro to keep me out of trouble
|