Bought a used '07 FX2 Screw with a JVC KW-AVX800 7" LCD in the dash, but the previous owner did not leave the RCA and A/V cable harnesses in it. I also will need the rear camera wire that was supposed to come with it, the one that you connect to the vehicle, not the AV one (it's not supplied with the radio) I have the remote though...

Any thoughts on how/where to get these cables? I searched JVC's site and Crutchfield and found zipppp.

I did educate myself on the rear cameras, the iPod adaptor, the Bluetooth adaptor... but no dice, or clear cut answer on the cables I'm missing.


Perhaps there is a resident shop owner on this board that can point me in the right direction?

 

what do you mean rcas like the female rcas on the back of the headunit or the males that go to the amp?

 

Hmm, IROC send me an email detailing everything and Ive got some people I maybe able to get in contact with. Now, do you need the extension for the reverse wire or the entire assembly/harness? If its an extension, just use a piece of wire.

 

I sent you an email...

Yes, the whole assembly/harness is needed... but I did locate a 5.1 harness already for the audio out to sned signal to amps.


I'm sure glad I kept my old box I built!

 

Still need the AV I/O harness (which contains the back up camera wires, btw)...


And I wonder if anyone out there has had an issue with the sub out not sending signal to the amp while in CD mode? Mine only bumps bass on the FM signal, but nothing on dvd's or cd's... I have every setting correct...

Could it be that the unit requires every channel amped to work correctly?