View Single Post
  #1  
Old 05-03-2009, 04:08 PM
Hawkz28 Hawkz28 is offline
Senior Member
 
Join Date: Dec 2003
Location: NJ
Vehicle: 2006 Ford F150
Posts: 150
Send a message via AIM to Hawkz28
Mode door problem, help

Hi all,

A few days ago air would only blow out of my vents and a little out of the floor on my 2006 F150. To me it's either the control unit in the dash, the mode door actuator, or something jammed up in there.

The temperature blend door, blower, and everything else works so I'm leaning against it being the control unit in the dash.

So I went ahead and found the mode door actuator and took it off. The actuator moves three levers. One is on the floor connected by a rod, and 2 are underneath the actuator itself(can't see those 2 unless you take off the actuator).

Here's a pic of the mode door actuator I'm talking about, I found it from another post:




Two of the levers moved freely, one is jammed. It is the highest one, I'm not sure which one it does. I'm assuming I should be able to move all three levers freely correct??

Now what do I do, do I have to take apart the entire dash now??? THIS SUCKS. If I have to take apart the entire dash to get to the actual door, I'm thinking dealer time......

Last edited by Hawkz28; 05-03-2009 at 04:15 PM.
Reply With Quote