F150/Lightning parts

Thread Tools
 
Search this Thread
 
Old Apr 25, 2009 | 10:30 PM
  #1  
yanniotis's Avatar
Thread Starter
|
Member
Joined: Mar 2003
Posts: 33
Likes: 0
From: Verona. NJ
F150/Lightning parts

Have parts left over from my Lightning build. Most of them are just F150 parts that are the same as a L.

As some of you know I had to replace the frame during my build, therefore I have many other parts leftover.

Engine parts removed @13k miles from a 2001 Lightning:
L/R Valve Covers fit all 5.4. $40
Clutch assembly for fan. $25
Complete exhaust from manifolds to tips. $75 will separate
Works 112 blower w/ PSP programed chip. Made 436hp/543torque to rear wheels (have dyno sheet). $1200

I also have 99 Parts still available:
Complete rear assembly including brakes. $225 pickup only
Rear springs $40 pickup only
Rear storage box. $25
Trim pieces
Master Cylinder & brake booster assembly. $25 each
Fan & Clutch assembly. $40
Power steering box. $50
ABS unit with brake lines $50
Exhaust system (no manifolds) $45
Misc interior parts.

Have pics of most stuff. Let me know what you need. All prices are negotiable. Located in NNJ.
 

Last edited by yanniotis; Sep 10, 2009 at 09:15 AM. Reason: Updated
Reply
Old Apr 25, 2009 | 11:05 PM
  #2  
01f1502wd's Avatar
Senior Member
Joined: Apr 2009
Posts: 1,651
Likes: 0
From: Copper Canyon
is the rear window power or just a manual sliding?
 
Reply
Old Apr 25, 2009 | 11:23 PM
  #3  
yanniotis's Avatar
Thread Starter
|
Member
Joined: Mar 2003
Posts: 33
Likes: 0
From: Verona. NJ
Originally Posted by 01f1502wd
is the rear window power or just a manual sliding?
Hello. Just a standard manual slider.
 
Reply
Old Apr 26, 2009 | 12:58 AM
  #4  
EBXGSXR's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,206
Likes: 0
From: Baltimore, MD
got any pics? any idea of how hard it would be to install cab onto a 97? i would like to the other opening "door", but im not sure if it would be worth the trouble. what color is the cab also?
 
Reply
Old Apr 26, 2009 | 02:03 AM
  #5  
Sundevil2188's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,441
Likes: 0
From: Scottsdale, Arizona
How much for just the stock radio?
 
Reply
Old Apr 26, 2009 | 07:53 AM
  #6  
01f1502wd's Avatar
Senior Member
Joined: Apr 2009
Posts: 1,651
Likes: 0
From: Copper Canyon
will you sell just the spedo/tach/gauges? and the cup holders that go in the dash. hopefully it will fit.
 
Reply
Old Apr 26, 2009 | 10:27 AM
  #7  
yanniotis's Avatar
Thread Starter
|
Member
Joined: Mar 2003
Posts: 33
Likes: 0
From: Verona. NJ
Originally Posted by ebxgsxr
got any pics? any idea of how hard it would be to install cab onto a 97? i would like to the other opening "door", but im not sure if it would be worth the trouble. what color is the cab also?
We just removed the cab on Friday, so no pictures of it yet. It only took 1hr. It is 6 bolts, a few wires, master cylinder lines, & steering coupling. It is black. The cab will be the same for 2dr 97-03 F150's & 99-04 L.

Originally Posted by Sundevil2188
How much for just the stock radio?
I am not sure. How about $50??

Originally Posted by 01f1502wd
will you sell just the spedo/tach/gauges? and the cup holders that go in the dash. hopefully it will fit.
Speedo is gone. cupholders $15 plus the ride??
 
Reply
Old Apr 26, 2009 | 10:45 AM
  #8  
01f1502wd's Avatar
Senior Member
Joined: Apr 2009
Posts: 1,651
Likes: 0
From: Copper Canyon
Originally Posted by yanniotis
We just removed the cab on Friday, so no pictures of it yet. It only took 1hr. It is 6 bolts, a few wires, master cylinder lines, & steering coupling. It is black. The cab will be the same for 2dr 97-03 F150's & 99-04 L.



I am not sure. How about $50??



Speedo is gone. cupholders $15 plus the ride??


the ride? 15 shipped sounds good.
 
Reply
Old Apr 26, 2009 | 11:25 AM
  #9  
01f1502wd's Avatar
Senior Member
Joined: Apr 2009
Posts: 1,651
Likes: 0
From: Copper Canyon
nevermind I fixed my cupholders today. just needed some screws, thanks tho.
 
Reply
Old Apr 26, 2009 | 05:12 PM
  #10  
yanniotis's Avatar
Thread Starter
|
Member
Joined: Mar 2003
Posts: 33
Likes: 0
From: Verona. NJ
Originally Posted by 01f1502wd
nevermind I fixed my cupholders today. just needed some screws, thanks tho.
No problem.
 
Reply
Old Apr 26, 2009 | 08:42 PM
  #11  
EBXGSXR's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,206
Likes: 0
From: Baltimore, MD
oh scratch that....i thought it was a scab with the 4 doors. sorry.
 
Reply
Old Apr 26, 2009 | 09:06 PM
  #12  
Sundevil2188's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,441
Likes: 0
From: Scottsdale, Arizona
Originally Posted by yanniotis
We just removed the cab on Friday, so no pictures of it yet. It only took 1hr. It is 6 bolts, a few wires, master cylinder lines, & steering coupling. It is black. The cab will be the same for 2dr 97-03 F150's & 99-04 L.



I am not sure. How about $50??



Speedo is gone. cupholders $15 plus the ride??
Sounds good man. Can you put it on hold for me? Ive got to clear it with management at work tomorrow. I need it for a display im building.
 
Reply
Old Apr 26, 2009 | 09:16 PM
  #13  
yanniotis's Avatar
Thread Starter
|
Member
Joined: Mar 2003
Posts: 33
Likes: 0
From: Verona. NJ
Originally Posted by ebxgsxr
oh scratch that....i thought it was a scab with the 4 doors. sorry.
No problem

Originally Posted by Sundevil2188
Sounds good man. Can you put it on hold for me? Ive got to clear it with management at work tomorrow. I need it for a display im building.
OK. Let me know tomorrow.
 
Reply
Old May 9, 2009 | 09:37 AM
  #14  
Mondo1's Avatar
Senior Member
Joined: Mar 2001
Posts: 1,352
Likes: 0
From: CORAL SPRINGS, FL. USA
Would you happen to have the coin/ash tray cup? Thnx.
 
Reply
Old May 17, 2009 | 07:22 AM
  #15  
crash_lucky13's Avatar
Senior Member
Joined: Jul 2005
Posts: 1,463
Likes: 0
From: off the path in Louisiana
got a list for you

passenger side A pillar
the interior panel pieces that fit on the back wall on the inside
what about the A/C hose with the condenser on it??
 
Reply



All times are GMT -4. The time now is 06:44 PM.