View Single Post
  #32  
Old 02-08-2009, 06:08 PM
4.2trimble 4.2trimble is offline
Senior Member
 
Join Date: Dec 2007
Location: Tampa, FL
Vehicle: 1999 Ford F150
Posts: 4,741
ok i see what you are saying... and we probably wont be doing that.

If needed we will run a CV style front D-shaft to help with angle. And if the angle is THAT bad we might rotate the T-case from its usual sideways mount to straight up and down. This will help with angles as well.

Joe did this on the lasat 150 he SAS'd but doesnt think ill need to unless i got EXTREMELY big.

We also decided to cut ANYTHING out that is not needed, front crossmember will be cut out and redesigned.
__________________



"Project 1ton150" build thread coming soon keep an eye open

http://www.f150online.com/forums/sus...ere-we-go.html
Reply With Quote