Unfortunely all of the lights onthe the door, a\c shifter where soldered in place of the green ones.Sometimes it was easy as removin the green led and soldern in the blue.But the shifter was pretty tough,i installed a led under every shift position so the color would be even all the way across.But it's not to hard though,I knew nothing about leds,or solderin but I really wanted the look so I set out to learn on the net all that I needed to know about soldern,resistors,etc.It took me awhile to complete it all do to my work hours but my truck isn;t a daily driver so it was no matter.Just set out to get it done and it turned out pretty good.A word of advise,don't get in a hurry,and if you get convused on how to pop a panel or what is this, the guys on this sit are a wealth of info and I accredit this mod to there help to me.
