I was told that some Billstein 5100s would be good for my 05 F150 with Procomp 6" lift..So I ordered me some online. Before I ordered them I emailed another company to ask the specific product number and they replied saying that Bilstein didn't make a shock for a 6" lift. Does anybody know for sure about this, I would appreciate your responce!

 

They do make them for a 6" lift. In fact, those same shocks come standard on the RCD 6" lift kit.

 

Thanks Msa(Duck hunter), just making sure I didn't get took to the cleaners!

 

so i have the basic procomp stage 1, if i get the 5100's i can get rid of my spacer right? Then adjust them to the 2 inch setting and run 37's?

 

i think they only go to 6"

 

right but then they have adjustable settings so you can turn em from 1-2'? I think but thats just what i have heard and read.

 

They can be set at 4" or 6"

 

You can get Bilstiens for your 6 inch lift that will allow you to do away with the Pro COmp spacer. You can also get standard OEM replacement Bistiens, crank them up for 2 inches of lift and keep the Pro Comp spacers.

 

I must have the stage two since it has coilovers. SO what your saying is that I need to take out a spacer before putting them on. I take it the spacer is the black one between the block and the leaf springs.

 

Oh, rear shocks.

5150's is what you'll need. You can also get a 5.5" block if yours are stacked.

11.94" 255/70 Platinum Powdercoat 29.7" 17.9" BF5-A187-H1

http://www.eshocks.com/bil_ORsb.asp?...ubChar=Q&Spec=