anybody put a roush offroud exhaust on an Expy? also does anyone has any pictures of a white/tan Eddie Bauer Expy with dual exits out the rear (on either side of the spare tire)?

 

I wanted to put the same on my expy, BUT, was told that with the roll stability control that it was not possible. I am contemplating to use the roush system and slightly moding it to a side swept (PS) dual.

I am waiting till I get in the states to have a custom made for the sound and look I am wanting... I am told (by roush) that it is impossible for the F-150 style system to be compatible with the EXPY. (I say, there is more than one way to skin a cat!) It will just have to be a custom job I believe! Only time will tell. Good Luck finding a cusom pipe bender in germany! Been searching for 2.5 years!

 

even the muffler if it's a SI/SO would work with the pipes being split after the rear suspension

 

 

interesting picture, my wife said she wants the tips to exit like the F-150 exhausts dowith one tip on either side of the tow hitch / between the reverse sensors / about 2.5-3ft wider spread than the one in the photo. I'm thinking 3.5 or 4 inch by 18 tips for the look and a single in single out muffler (hmmm i've got a single 3 inch in 3 inch out straight thru maggie in the storage shed) with a high flow Y after the suspenion some bent pipes and tips welded in I'd be all set.