Starting my ford with bad starter???
#1
Starting my ford with bad starter???
Is it possible to start my f150 when the starter isnt working?? I basically just want to limp it to a shop without paying a tow bill.. . Is there a way to use a screwdriver on it to turn it over touching contacts??? When I use the key, i just get one click from the solenoid on the firewall..
Thanks
Sean
Thanks
Sean
#4
#6
First of all, change the starter yourself. If you can change your oil, you can change your starter. That way , you can go thru your harness and check the cables out good. Grounds too - Specially the one behind the passenger side tire / top of the frame rail. That one needs to work well. Here's a pic of it -
Also , these trucks are picky as far as starters. Get the factory starter - it's guaranteed for life/ or as long as your trucks breathing. Apic of the factory Bosch Starter -
Last edited by jbrew; 09-25-2008 at 12:30 AM. Reason: pics
#7
Trending Topics
#9
chevy starter>ford starter....chevy starter you undo 2 bolts and they fall out...ford starter the bottom and middle bolts arent to bad but the top one gets tricky. have a friend tell you where your socket is by looking threw the manifold. i used a long 1/2" socket with 2 3" 3/8's extentions and got to it. my starter is stright from ford 180 bucks... as far as the old one hit it with a hammer get those magnets jumpin in there...also check your wires going to the starter. My stock wires still worked but there was bare coper showing!!! you can arc it at the starter soilnod on the fire wall. or under the truck. make sure the key is foward thoe other wise it will just crank and crank. Good luck
#10
#11
#12
i just got a 4G from autozone 7 bucks. and then my buddy had some smaller speaker wire i think to go to the other postive. id say get the wires from autozone and get the starter from ford..you could always get a reman starter for like 60 bucks but Jbrew said somthing about our trucks being picky about starters so i donno. and make sure when you put the starter back in that NO WIREs are touching the exhuast...it will metal and short turning off your truck...belive me i know! Good luck
#13
Thanks for the info guys, I am planning on doing it this weekend.. I called the Ford Dealership and and the wiring kit is 150 dolllars!!! The Starter itself is 180... Should I go ahead and replace all the wires??? Or just get a 4G Wire from the battery to the starter???
Thanks
Thanks
-------------------------------------- #3 is a complete harness. ^^^^
Personally , I would purchase the harness from Ford if I needed one. The factory Bosch starter can be had @ Murray's and Car-quest -AFAIK
The new OEM starter I have was $160 - I also gave them my old for another 10 or 20 bucks off.
Last edited by jbrew; 09-25-2008 at 09:27 PM.