My 4x4 F150 hub/bearing replacement how too.
#1
My 4x4 F150 hub/bearing replacement how too.
My truck is a 98 f150 4x4 and i just replaced my left front hub bearing and threw this together for yall. Not saying it is 100% but it is basic so you can get it done. I have never done this b4 and it only took me 30mins
Truck in shop
POP center cap off
Remove carter pin and cover
Truck in shop
POP center cap off
Remove carter pin and cover
#2
#3
Then remove the caliper mount by removing the 2-18mm bolts holding it on. After you have that remove slide the caliper mount off
Then remove the heat shield so you can see better by removing the 3-8mm bolts
Then Remove the 3-15mm bolts holding the hub on and slide the hub off
Then remove the heat shield so you can see better by removing the 3-8mm bolts
Then Remove the 3-15mm bolts holding the hub on and slide the hub off
Last edited by Dans4x4F150; 09-24-2008 at 03:42 PM.
#4
#7