window cable snapped while flexing?

Thread Tools
 
Search this Thread
 
Old Aug 24, 2008 | 02:50 PM
  #1  
dirt101's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2008
Posts: 9
Likes: 0
From: Fredericksburg
window cable snapped while flexing?

Today I was driving along and I saw a nice place to flex the truck a little, so I did. I parked the truck and got out to take a quick picture and I heard what sounded like a rock being thrown from the near freeway(like 10 feet away). I didnt think anything of it, but on the way home my back passenger window slid its way down, and my control doesnt do anything(motor does turn). I took off the door panel and couldnt see a whole lot do to the interior door panel.

what do you guy think?
 
Reply
Old Sep 7, 2008 | 06:41 PM
  #2  
UJSLOST's Avatar
Member
Joined: Sep 2008
Posts: 54
Likes: 0
From: Albertville, AL
sounds like you need a window regulator now. Easy to install on that particular model too.
 
Reply
Old Sep 7, 2008 | 06:57 PM
  #3  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
my cables came un wound and i just re wound it but needed a new cable because it was frayed, you can get a bicycle brake cable and some crimp style ends and make a new cable and re wind it
 
Reply
Old Sep 7, 2008 | 08:31 PM
  #4  
02SC4x4's Avatar
Senior Member
Joined: Jun 2006
Posts: 451
Likes: 2
From: Toronto, Canada
lets see the picture!
 
Reply
Old Sep 9, 2008 | 06:59 AM
  #5  
dirt101's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2008
Posts: 9
Likes: 0
From: Fredericksburg
haha I only took one and it was with my phone. I got a buddy with a ranger that thinks his truck can flex more than mine so I just had to flex it out, and get a picture for him.
 
Reply




All times are GMT -4. The time now is 07:19 PM.