Time for me to replace front wheel hub bearing!!!

Thread Tools
 
Search this Thread
 
Old Sep 3, 2008 | 02:12 AM
  #1  
Dans4x4F150's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 211
Likes: 0
From: Warrensburg Missouri
Time for me to replace front wheel hub bearing!!!

Yup when i got the truck about 1.5 year ago i replaced the started replacing the bad ball joins so i did all 4 of them. Well when i went in for a alignment they showed me how bad my passenger side hub bearing was so they replaced for me and i just had to buy the part at there cost! no lebor they were friends of mine . Well now about year and a half later the driver front one has some play in it and it is squeaking! Anyone no of a cheep place to get one? The cheepest i have found on ebay is 90shipped. My truck is a 98 4x4 f150. Anywhere else? If anyone have the size of the axle bolt please let me know. Im going to do a write up for everyone else.
 
Reply
Old Sep 3, 2008 | 10:29 PM
  #2  
fordmerc's Avatar
Member
Joined: Mar 2007
Posts: 84
Likes: 0
From: Hayden, CO
The nut on the cv at the hub is a 36mm, the smaller bolts at the front diff if you want to take the whole cv axle out are a 12 point, 12mm, same as the bolts that hold the drive shaft to the rear diff.
 
Reply
Old Sep 4, 2008 | 06:57 AM
  #3  
firedognick's Avatar
Senior Member
Joined: Jan 2007
Posts: 130
Likes: 0
From: Marshville, NC
Hey man I know the feelin! I replace them often, I got all of mine at thepartsbin.com/ I payed 190 though, as aposed to 300? that AutoZone wanted. I called to place the order and got an extra 10bucks off. It ain't no 90 dollars IMO. Well now that I think of it I am not even sure if we have the same part I have an 03' 4x4? I have changed all of mine because I wasn't paying anyone and it was pretty easy.
 
Reply
Old Sep 4, 2008 | 12:58 PM
  #4  
Klitch's Avatar
Senior Member
Joined: Oct 2003
Posts: 4,920
Likes: 5
From: Washington
90 something shipped is the lowest price ive seen.

im pretty sure its a 36mm nut on the cv like fordmerc said. althought i dont know why he's telling u about the 12pt bolts on the driveshaft.
 
Reply
Old Sep 4, 2008 | 10:13 PM
  #5  
fordmerc's Avatar
Member
Joined: Mar 2007
Posts: 84
Likes: 0
From: Hayden, CO
I was just including that in case he wanted to take the cv axle completely out. Just saying the bolts at the front diff are the same as the rear driveshaft.
 
Reply
Old Sep 4, 2008 | 10:52 PM
  #6  
rcfreak24's Avatar
Senior Member
Joined: Aug 2007
Posts: 153
Likes: 0
From: Omaha, Nebraska
I just replaced my whole hub assembly on the driver side front 2 days ago! i cant find my pictures but it was easy as heck! I payed 166 for the assembly.. Took about 30 minutes to do it for a first time. 3 bolts holding it on, 2 bolts for the brake caliper, 3 screws for the brake cover, and the 1 big nut on the cv shaft....
 
Reply
Old Sep 10, 2008 | 12:32 AM
  #7  
Dans4x4F150's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 211
Likes: 0
From: Warrensburg Missouri
yeah i know it would be easy just need to no the cvc bolt size and thanx alot for the help! I found one at a 4x4 salvage shop for 65$ and its only 15 miles away
 
Reply
Old Sep 23, 2008 | 07:17 PM
  #8  
Dans4x4F150's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 211
Likes: 0
From: Warrensburg Missouri
went and got the part today $65 used but life time replacement warranty going to try and throw it on tomorrow
 
Reply
Old Sep 24, 2008 | 03:23 PM
  #9  
Dans4x4F150's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 211
Likes: 0
From: Warrensburg Missouri
here ya go https://www.f150online.com/forums/ot...t-how-too.html
 

Last edited by Dans4x4F150; Sep 24, 2008 at 03:41 PM.
Reply




All times are GMT -4. The time now is 10:43 PM.