Quote:
Originally Posted by bluebeast06
so i got the tuner and the lower pulley from troyer, sent the tuner back for the custom tunes, mean while i stare at this pulley, i read instructions and it says something about locking the torque converter with a special tool cant i just put the truck in park? and i dont see this wire cage that is being said to remove! any help would be great thanks fellas
|
Its simple, look on the drivers side on the back of the transmission, you'll see a rubber cap/plug that fills a hole. Pop it out and I think it's a 10mm bolt on the torque converter. Get someone to spin the motor over until you see the bolt visible through the plug hole. Put an socket and a short exten. on the socket, put it on the bolt and hold it while you turn the crank bolt to hold the extension up against the bell housing. You'll see it. Just take off the plug and spin the crank bolt with a wrench until you see the bolt, put the socket over it and it will lock it against the transmission bellhousing. Then you can back off the crank bolt.