I have been waiting for Haynes or Chiltons to come out with a repair manual for the 2007 Ford F-150 to get the wiring diagrams. I emailed Haynes and they said that they don't have plans to come out with a manual for the 2007's. I was wondering if the electrical diagrams in the 2004-2006 manual would be the same for the 2007. I've ordered a set of driving lights to install and I'd like to install the correct headlamp switch and would have to make my own wire harness as my truck doesn't have the foglamp wiring on it. There are a few different ways I can wire them up, I just need the color coding on the wires so I know which one(s) I need to tap into. I've installed driving lights on my old '94 F-150 so I'm savvy on how the electrical system works. Any help would be much appreciated.

Thanks

 

Download both pdf files.

http://www.mediafire.com/?zd1bxedbxlc
http://www.mediafire.com/?hn1nnzbd9w3

Steve

 

Do I need to register and log in with mediafire? I couldn't get the files to download. I'd still like to get the 2004-2006 Haynes manual if it's the same for the 2007.

 

There is no need to register or log in. Just click on the link I provided, wait for the page to load, then clink on the link where is says to in order to start the download. If it doesn't work on your computer system, then there's something wrong with it, not the site. Make sure you have Flash enabled in your browser.


Steve

 

Thanks a lot. That worked. I thought that box was an advertisment before that's why I didn't click it.
Thank again, David.

 

I bought my factory service manuals for my 07 off ebay. they also came with the wiring diagrams. I got them for about $100 I think they run $600 new.

http://cgi.ebay.com/ebaymotors/2007-...spagenameZWD1V

 

I'll check that out tomorrow. I'm at work now and will get surf blocked if I click that link now. Thanks for the info and link.

David

 

I have full service dvds 03-04 05-06 and 07-08

its nice to know people

 

1992 - 2008 (Oct '07).

GOTCHA!

Steve

 

Well I finished installing the driving lights in the slot of the bumper. It came out better than I expected. I took pictures of the mounting frame that the lights are attached to. I'll post pictures soon as soon as I figure out how to get them on here. I have them wired to a remote on/off switch. I would still like to get the correct OEM foglamp switch for the dash but am unsure if the truck wire harness is prewired going to the OEM foglamp relay slot. I would hate to buy the switch and find out there is no wire as my truck didn't come prewired for foglamps. I did a search but couldn't find out how to remove/replace the headlamp switch. I am also looking for a grommet in the firewall to run the wire I plan on tapping into for the driving lights so I can turn on the lamps with the high beams on also. Anymore help would be much appreciated.
Thanks, David

 

These new driving lights made a huge difference. Friday morning the lights were a little low so i adjusted them up. Well this morning I kept blinding everyone. I made another adjustment and I'll see tomorrow morning how they do with oncoming traffic. I still plan on posting pictures so be patient .

David

 

I finally got the pictures.

Well I guess the pictures won't work. I've downloaded them to my photo album but don't know how to post them here.
https://www.f150online.com/forums/me...ights-003.html
https://www.f150online.com/forums/me...ights-002.html
https://www.f150online.com/forums/me...ights-001.html

 

Not tryin to Hijack the thread here but, would anybody have the electrical diagrams for the 4wd and A/C on a 2006 Mark LT???
Thanks!

 

I finally found a wiring diagram book for my year model truck. It is an electrical wiring diagram book printed by Ford. I found it on Ebay and paid $15 for it. It is so full of info and it's better than a chilton or haynes book.

 

store name or any further info so i can get one