Does anyone know what tranny will bolt up to a 69 f100 360? its got the 3spd manual in it now, but the clutch is kinda outta wack and the clutch pedal only travels an inch or two, it still works but its annoying. Auto or manual. Thanks
P.S. i'm pretty sure its what they call the "low hump" version

 

c4 c6 and the 4 spd. and a newer 5 speed i believe will bolt up to it.

 

even with the low hump? the 3spd thats in it now is small compared to a c6,

 

well i think some of the old f100s had the c6 in them. i may be wrong though.

 

Your bellhousing will only fit the FE series engines, but it will take the following transmissions:

3.03 3 speed (what you have now)
T-18
T-19
NP435
Toploader 4 speed
T170 series 3+OD toploader clones
Tremec 3550
and probably some more.

Don't know about the hump issue but it shouldn't be an issue with anything except possibly the Tremec 3550

If I were you, I'd solve the clutch problem first.