Quote:
Originally Posted by houlej
I think you might be able to easily get the unit apart if you just heat it up - like in an oven. There's members over on NHTOC that used this method to paint the inside of their Lightning tail lights. As soon as I get the opportunity I'll try it myself. As for the reduced light output - I'll check the voltage with my meter and see if it does get a full 12V
|
You might be right about heating to get the unit apart, but I don't think it's held together with the same kind of adhesive as say, the headlight housings. It looks to me like the units are possibly "superglued" together, or assembled with some other kind of adhesive that "welds" the plastic.
If you DO take a puddle lamp out, be careful. The tab that holds it into the mirror is easy to break (I did it on the right side mirror and then used epoxy to fix it).
- Jack