|
starting problems
have a 90 f150 with the 5.0L 302. I installed a new distributor mounted module and to make a long story short, the engine wont start (not the new module) had it running for a couple minutes to set the timing and now nothing. put the old one back in and still nothing. I had to pull the dist. to remove this and do the new install, and I marked the rotor in relationship to the dist. housing. and I marked the housing and the engine block. I believe I installed it correctly (2nd time for this same job). also I have a remote starter to bump the engine, does anyone know how to hook this up? most directions are vague.
thanks guys
|