Quote:
Originally Posted by bigtex44
I'd like input from any one who has experience with the RF 3sixty.1/2 devices (Low_E_Red specifially).
Assuming a stock (audiophile) HU, once you have the 3sixty sum the signal and de-EQ, are you supposed to use the 3sixty remote from then on to adjust volume? I ask because when I was researching the JL CleanSweep, after having it correct the factory HU signal, they made it appear that if you changed the volume on the factory, you'd have to go back and let it re-EQ.
If the 3sixty can "EQ on-the-fly" where I get to keep using my HU/steering wheel controls, that would definitely close the sale for me.
|
The 3Sixty will not "re-EQ" without redoing the learning process. That will take between 5-15 min.
You do need to use the volume knob given because the Ford radios will decrease the lower frequencies as the volume goes higher. If kept at a continuous volume on the HU and then use the RF knob, then you will keep all frequencies consistant and the frequency levels will remain correct.
If you have any other questions regarding this piece of equipment, email me. I will then give you my phone number and we will go from there.
__________________
SPL is one note... SQ is a flat 20-20.
If ported, always tune to
CRF 33Hz... aka the Golden Number
Quote:
Originally Posted by styxnpicks
after he bent me over and called me sally
|
PLEASE DO NOT PM ME. EMAIL ME INSTEAD (the email form for me is found by clicking on my name at the top of the post.)