|
I helped on the install on the 3" springs, we moved the gas tank.
Just unbolt the filler neck from the bed side, and slightly lower the tank and take the straps loose, and move it around as needed. It can slide any direction about a foot. Just be careful. We had a 4' long 6"8" piece of wood under it to support the full length of the tank.
Front camber should not change much after doing the rear. Only thing that should change is caster, which is a non-wear angle.
Just do the rears first, take it to the shop, have them do the fronts and alignment. But honestly the fronts arent that hard to do. Actually easier then doing a spacer install i believe.
__________________
Jmod... 3/5 Drop... Tint 15%F 1%R... Dynomax Bullet Dual 16" Efans
P&P TB/Plenum... L HL/Corners... Custom Sub Box Reverse Fogs
jamzwayne : I'm not saying dont get any hoopie patch for your dang-dang
scott1981 : Fly your American flag, but dont let it block the view of your toyota.
gators241987 : Chris Hansen is a coc.blocker
jbrew : 5fours are notorious for leaking up front @ the water jackets
|