Quote:
|
Originally Posted by Justi
I used to be heavy into car audio so installing is not foreign to me. However, 15 years ago it was a simple head unit and then the amps. Now there'a bit more..
THE QUESTION:
Do you guys run all of the in-dash audio components off the same live wire on the stock harness?
* Head Unit
* Blue Tooth Box
* Satellite Tuner
* Satellite IP Bus
* PAC Steering Wheel controller
All of these require a live wire and while I realize that all except the head unit are excessively low draw (amp wise), I am just concerned about running everything thru a single wire intended to power a factory deck. Do you run another switched line to the fuse panel? Will that affect the delayed off feature? If even that carries over to the aftermarket deck.
Thanks for your help in advance guys..
|
You could get away with it. But i like using the key switch wires under dash or the 12V Powerpoint next to the radio.
__________________
 
SPL is one note... SQ is a flat 20-20.
If ported, always tune to CRF 33Hz... aka the Golden Number
Quote:
Originally Posted by Odin's Wrath
Eye-humping: One advantage of dating a girl with a glass eye.
|
PLEASE DO NOT PM ME. EMAIL ME INSTEAD (the email form for me is found by clicking on my name at the top of the post.)
Anyone hiring?!?!? Fired(og) Installer
Last edited by Low_e_Red; 02-25-2008 at 10:09 PM.
|