Quote:
|
Originally Posted by Raoul
I made one for next to nothing from stuff I had in the garage.
One piece of PVC pipe 1-3/4" dia (four foot)
One piece 3/8" plastic panel 5'X5"
Four or five nuts/bolts.
drill the pipe 'centered' to the plastic
drop the pipe into the gap
Even if the pipe you have isn't wide enough to 'grab' between the bed and tailgate, you can wrap duct tape round each end until you get a snug fit.
Make two of them and then buy your dad an $80 gift.  |
This sounds like a good idea-but can you open and close the tailgate with it in or does it only work with tailgate open
Thanks for the input