Quote:
|
Originally Posted by grayday
If your going to use the hammer method, place a jack right under the a-arm so when it pops off it doesnt go very far. I did it this way. Then you can slowly let the jack down to let off the pressure.  |
or you can unthread the nut almost all the way and let that stop the spindle. using a jack is a good idea either way though. you can't be too careful with that kinda stuff.
__________________
I install leveling kits in the Houston area - $125
Last edited by TXST8tj; 10-04-2007 at 01:09 PM.
|