I just put on my modified intake tube last weekend and am happy with the results! The total cost for me was around $12. Of course the only problem I had was grinding down the end of the tube that goes into the fender. After a dozen trips from the bench grinder to my truck, I finally got it to fit. Make sure you have that tube cut to the proper length because I busted my first tube on the saw trying to cut it to length. Also watch out for the "stock snorkel" because it has a little angle on it, which in turn makes the modified tube a little bit of a tight fit.
I noticed some other replies talking about a "silencer" in the L tube. Where is it located approximately and does anybody have a pic of it? I would like to make my truck sound as mean as possible without tearing it up too much.
By the way I call my new modification my "Redneck Intake"!
