I just in stalled a S&B intake in my 4x4 XLT screw 5.4 and notice that there was a vacuum line loose right behind the drivers side headlight. It seems to be coming from the 4x4 wheel solinoid. Does anyone have a vacuum diagram for the engine bay or know where this line might go. Thanks inadvance.

 

Well I have 100+ posts but haven't been here 90 days so I can't send you a PM .....BS if you ask me!

Is yours a 5.4L ?

I'll post it on my photobucket and put up a link.

 

Sorry about that, yes its a 5.4. Thanks

 

Ford has moved the location of their vacuum diagrams in the 05-up models. Soon as I find them I'll post it up.

 

Thank you.

 

Anyone

 

Got a note back at noon from my FORD dealership parts tech and HE hasn't found them yet either. Sorry for the delay..........

 

I have a hose like that as well - that's the breather hose. It doesn't connect to anything - not suppose to.

 

Thanks

 

No problem. Yea it's labeled "Vent" towards the front of this diagram.

 

Thank you, I need to print this out and take look. Thanks a lot.

 

[QUOTE=jbrew]No problem. Yea it's labeled "Vent" towards the front of this diagram.

That's identical to the 1998 schematic. It may not make much difference in this instance but I'd think a '05 would be different.

 

[QUOTE=Carolina Five-0]Where you able to find the one you were looking for? I line that is loose on my truck isnt near any other vacuum line so im thinking it is a vent line.

 

Haven't located the 05 diagram yet.

You may be looking at the vent hose. Locate the vent on the front axle and follow the hose upward. Then you'll know if it's the vent...........

 

Thanks I will do that Monday.