I just realized why imagethrust wouldn't upload for me. My other pics are down as well. I will re-upload them up to f150online here a little later on
This is the hole that the stock intake tube goes into the fender well. It has not been modified except for a little bit of paint that got scraped off while trying to fit the PVC in
As you can see inside the airbox there is a little nipple in there. There is one on both sides of the airbox where the stock snorkel was removed
This is the stock snorkel piece that was removed from the stock airbox as seen above. You should notice the little hole cut in it, near the top. There is one of those on either side where it clips into the airbox. I just used a couple of flat head screw drivers to lift the tabs up and it slides right out.
