i also had bad experience using the troyer e-fans offroad, the vibration caused them to rub two small holes in my radiator, due to the way they attach with the copper rods, also went threw 4 controllers before i just hard wired them to a switch and a relay, so now i have to turn them on manualy, fixed the problem with the holes by using this mounting kit i got from mike at madenterprise.
here is the damage the kit caused i had to replace the radiator
__________________
 03 F-150 5.4 FX4 with HD supercharger swap at 10PSI, 6" fabtech with PA 3" body lift, 38"15.5" MT Baja claws, on 16" 10" extreem aloys, fabtech steering stabilizer, procomp traction bars, pro comp add a leaf, cranked torsion bars,4.88 gears, detroit locker in rear, ARB locker up front, troyer E-fans, X-cal 2 tuned by Sal, FTVB shift kit, on board air system, TONS OF CUSTOM MODS, AND ONE UNSTOPPABLE BEAST
|