Please post pics of your F150s with 35x12.50-18s on stock wheels and please let me know how much rubbing you have and if you did any thing to cut down on the rubbing like put a wheel spacer or some thing else.

 

Also what kind and brand of tire are you using?

 

a little rub at full lock to the right and no cutting, tons of pics in gallery

 

Any body else?

 

yessir
2-2.5" leveling kit will be necessary

35x12.5R18 Pro comp XTerrains
rubs upper and lower control arm at full lock L&R
plenty of pics in the 'rktektr' gallery

 

35x12.5's R18 with 4" Rancho.....No rubbing at all.

 

35"X12.50 BFG muds here, I've run them the last two winters and absolutely love them. I rub on the frame at full lock both ways, but it isn't bad. I did do a little grinding to a flange on the frame where the suspension lower cradle is welded to the frame. The lugs of the BFG's were catching on the flange and tearing the inside lugs up a little. 3minutes of grinding solved that, and now they just rub on the smooth vertical part of the frame and don't hurt anything. Oh, and I have a 2.5 Daystar installed. More pics in gallery

 

I am looking to sell the combo, but this is what they look like! 3" lift and 1.25" spacer.
325/65/18