Please post pics of your F150s with 35x12.50-18s on stock wheels and please let me know how much rubbing you have and if you did any thing to cut down on the rubbing like put a wheel spacer or some thing else.
35"X12.50 BFG muds here, I've run them the last two winters and absolutely love them. I rub on the frame at full lock both ways, but it isn't bad. I did do a little grinding to a flange on the frame where the suspension lower cradle is welded to the frame. The lugs of the BFG's were catching on the flange and tearing the inside lugs up a little. 3minutes of grinding solved that, and now they just rub on the smooth vertical part of the frame and don't hurt anything. Oh, and I have a 2.5 Daystar installed. More pics in gallery
'05 F150 FX4 Scab, Edge Evolution, 325/50/22 Terra Grapplers on 22" Forte wheels, 4.56 gears, 2.5 Daystar, Magnaflow SIDO, K&N FIPK
'79 F250 Ranger 2WD 460, 50K original miles, 3/5 drop kit, 9" rear, 1/2 ton spindle swap
'03 Kawasaki Prairie 650, progressive springs, clutch kit, rekeyed flywheel, DG power module
'77 F150, 4.10 geared 3/4 ton axle swap, 351M auto, work in progress
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Fordé is a registered trademark of the Ford Motor Company