yesterday I detailed the truck inside and out, vacuumed it, armor all'd it, waxed it, conditioned the leather, vacuumed it, everything. I just did a quick wipe down of it since yesterday the camera was dead and today it had some dust on it. I think it shines pretty good, how about you guys? This is post add-a-leaf and i put the stock tails back in....
Center of bottom of flare to ground height is
Front- a hair shy of 39"
Rear- 40"

Anyone want to measure a stock truck for me? 5.4 v8 4x4 offroad...Let me know what you think? think its worth 8500? has 150,800 miles on it as of today also, haha, doesn't look it though.





Here's that crooked door stripe I like so much-


Check out the reflection in this one-















Turns out if you stand down on it, it will still spin em

 

next on the list is a PTM valance, some L headlights, some spring alignment clamps since I the stock ones are now too short, and some darker tint.

 

looks good man. this in on my to do list for the summer. the inside floor of mine is horrid. its covered in dirt and sand etc

 

sickkkkk
i still want your seats and console

 

Looks good...is it just me but don't detailed trucks go down the road better?

 

Hella lotta rake in the first pic, but still a very clean truck

 

Good looking truck... wheels and tires are a great set-up

 

Looks great!

 

thanks guys...detailed trucks are faster! hahah...I wash/spray wax it 3-4 times a week usually

 

the full size pictures look much nicer....photobucket makes them look like they were taken on a disposable kodak.

 

for comparison's sake
stock with the front end down:


305s with the front end up:


doubled up the leaf under the main, max'd the front end with 305/65/17 on 17x10 Centerline Wolfer with cut valance/mudflap/zip tied mudflap, no rub.

 

She looks great...clean truck

 

thanks alot! Can anyone tell me what they used and what grit sand paper they use to prep/paint the tailgate handle/ valance

 

320, prime, paint. make sure primer is for plastic.

 

Clean lookin truck you got there.

Give me some more info on the console swap...what year expy and did it bolt directly in place?