Starter won't engage when key is turned on.

  #1  
Old 09-03-2003, 01:32 PM
nevarezr's Avatar
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Saugus, Ca
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Question Starter won't engage when key is turned on.

When I turn the ignition key on, I get a single click comming from the Driver's side kick plate. All the accessories (instrument pannel lights) work except the radio. I can get the starter to 'kick on' and start the truck by using a Quarter between the two large Posts at the Starter Relay (once I've disconnected the small grounding wire?) inside the engin compartment. Once I do that, I guess it resets
some 'Relay?' and it works fine for awhile.
It's been very hot here (102 average).
Does anyony have an idea which part is failing? oh yea, the radio also starts working
again.....
 
  #2  
Old 09-03-2003, 01:39 PM
larryp's Avatar
Senior Member
Join Date: Feb 2001
Location: Memphis TN USA
Posts: 298
Likes: 0
Received 0 Likes on 0 Posts
Sounds more like a bad battery cable connection. Depending on the age of your battery, that may also be the problem, or at least a part of it. You should take your truck to Auto Zone or the such and have them do a starting / charging system test. That will pin-point the problem.
 
  #3  
Old 09-03-2003, 02:03 PM
nevarezr's Avatar
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Saugus, Ca
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
I'l check

I'll check. In the meantime, anybody else with a suggestion is appreciated.
 
  #4  
Old 09-04-2003, 04:11 PM
nevarezr's Avatar
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Saugus, Ca
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Angry It is not the battery ....

Any other sugestions? Pleeeese ...
 
  #5  
Old 09-04-2003, 05:03 PM
toysupra6's Avatar
Member
Join Date: Jun 2003
Location: Lafayette, La
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
i would get a volt meter and check the power at the relay to see the drop across it, another thing is turn the light on while trying to start it if the go out u prolly have a dead cell in it. if all fails craw under and put the meter directally on the starter wire, if ever thing checks ok between 11-12.5 volts then it prolly is the starter
 
  #6  
Old 02-27-2004, 09:30 AM
Mrford's Avatar
Member
Join Date: Feb 2004
Location: indiana
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Go to the forum page click on engines and look for the post by Mrford no crank no start you will find your solution there
 


Thread Tools
Search this Thread
Quick Reply: Starter won't engage when key is turned on.



All times are GMT -4. The time now is 02:02 PM.