Quote:
Originally posted by Renegade1
I installed a B and M racing deep pan on my 2000 Expy 4 wheel drive 4r70w. I had to remove the transmission crossmember and install the pan. So far no problems and I never did install a tranny temp gauge, to compare before and after temps. The pan added about 3 more quarts of fluid. I don't see the drain plug on the bottom, sticking out to far grabbing anything as there are a lot more things that would get snagged on something first. The extra fluid alone has to be good for the tranny, just for cooling purposes. 
|
Renegade,
You did put the crossmember back, right?
I think I saw a picture of that B&M deep pan and it did not appear to be tapered toward the rear of the transmission. I also saw a picture that showed the pan was tapered so I think some damned salesperson just picked any picture and put it with the description of the pan. I hate when they do that.
Is the B&M pan completely flat on the bottom?
Does your B&M pan look like this?
Larry