What goes wrong with transfer cases?
#1
11-06-2003, 05:11 PM
Join Date: Jun 1999
Location: Houston
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
What goes wrong with transfer cases?
I have an '86 F-150 I use for the winter time, back-up vehicle, and just to tinker with. Well, the transfer case quit working. (New Process 108 I believe.) The truck still works in a "2 Low" mode, however, there is no power going to the front wheels. I am pretty sure it is not the hubs; any suggestions? Thanks.
#2
11-07-2003, 10:46 AM
Senior Member
Join Date: Nov 2002
Location: Somewhere Down South
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
On mine and several others that I know of the front and rear shift forks wear thin which in turn does not push the appropriate gear all the way in so that it is not engaged. They are about $25 each and a chain/seal kit is another $60. The transfer case is easy, the pain in the a$$ is getting it out and in.
#5
11-18-2003, 04:18 PM
Senior Member
Join Date: Nov 2002
Location: Somewhere Down South
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
